1, all of the adhesive can be etched surface plexiglass plexiglass plate and leave traces difficult to eliminate, so you can use self-adhesive stickers without adhesive way to protect the site.
2, grease, dust or pores are uniform coating and bonding difficult to leave the bubble, it is necessary to remove the spear before bonding.
3, when the bonding adhesive such as the amount is too small will shrink into the air when the adhesive.
4, the edge hair will direct bonding surface due to rapid evaporation of adhesive and white.
5, the indoor temperature, humidity and other factors also have an impact on the bond plexiglass plate.
6, stress plexiglass plate surface and surface stress and degradation caused by cutting tool will affect the bonding effect plexiglass plate.
7, before the adhesive fails completely cured by prolonged direct exposure to sunlight, will make plexiglass products in different degrees of yellowing, it will seriously affect the appearance of plexiglass.